REV’IT! Tornado 4 H2O Jacket

Comfort

Adjustability

• Adjustable elbow protection
  The adjustable elbow protection pockets allow you to tailor the CE-rated elbow protection to three different heights to perfectly fit your body and for optimal comfort while riding.
  
• Adjustment strap at lower arm
  
• Adjustment strap at waist
  
• Adjustment tab at cuffs
  
• Adjustment tab at upper arm
  
• Flexisnap at collar
  The REV’IT! flexisnap makes it possible to adjust the collar circumference easily and personalize its fit to each rider. A jacket is often worn in more then one season, and the flexisnap makes it possible to adjust the collar within seconds. During winter a wider collar circumference accommodates combining the jacket with a balaclava or wind collar, while during summer, a wider circumference lets an all-important cooling wind into the collar.

Pockets

• Two inner pockets
  
• Two slit pockets on front
  
• Waterproof inner pocket within waterproof liner
  The internal pocket within the waterproof liner is waterproof.

Lining

• Mesh
  
• Soft spacer mesh
  In-between, mesh lining to assure wearing comfort and fit.

Features

• Cuff zipper
  The zipper at the cuff has several purposes. It allows for easier entry into the sleeve, provides extra ventilation on warm days, and allows you to easily wear the glove cuff under your outer shell and over your base layer.
  
• External hang loop
  
• 3L hydratex over jacket
  Specifically designed waterproof jacket to wear over the outer shell.
  
• Prepared for vest connector NEON
  The Vest connector NEON allows you to the upgrade your jacket with a vest that quickly and easily attaches. The highly visible vest offers enhanced safety.
  
• Short connection zipper
  
• Two-way Collar Snap Closure System

Climate

Waterproofing

• Detachable hydratex|3L liner
  A 3-layer construction. The membrane has a layer of protective tricot laminated on each side of the membrane. This results in a waterproof and breathable membrane that is also very durable. This type of membrane also offers maximum flexibility, as it can be removed from the garment: wear the membrane inside the garment when the weather demands it, or take it out when you need maximum ventilation.

Insulation

• Detachable thermal liner

Ventilation

• Fully ventilated 3D air mesh
  
• Fully ventilated mesh

Fit

• Regular fit
  The Regular fit is designed for comfortable wear, and it’s tailored to suit different body shapes and sizes. However, it is not considered loose. It falls around the body instead of conforming to the rider’s physique.

Protection

Protection

• Ready for Avertum Tech-Air® airbag system – ONE SIZE UP
  Under this garment you can wear our REV’IT! Avertum Tech-Air® Airbag – or a Tech5 airbag – if you purchase the garment one size bigger than your usual size. If you wish to wear a garment that is marked as “”Ready for Avertum Tech-Air® airbag system””, you must be sure that the garment can accommodate the expansion of the airbag and therefore we recommend following below fit equation: 1. Measure chest circumference and divide the measurement by two; 2. Measure garment flat on chest line; 3. If the difference between point 1 and point 2 is 12 centimeters or bigger the garment is suitable to wear on top of the airbag. Note: Please keep in mind that the garment should be purchased in the correct size in order for the shoulder and elbow protection to fit properly and best protect you in case of a crash. In order to create space for the expansion of the airbag, you can remove all separate layers (thermal liners, water proof liners) that can restrict the expansion of the airbag in the event of a crash. Remove the separate back protector in your garment, if any, when wearing the airbag (a back protector is included in the airbag) and adjust all adjustment straps on body to the widest position.
  
• Prepared for SEESOFT CE-level 1 Divided Insert Chest Protector
  The protector pocket in this REV’IT! garment is tailor-made to accommodate the Divided Chest Protector SEESOFT CE-level 1 – an easy upgrade to maximize safety.
  
• Prepared for SEESOFT CE-level 2 Insert Back Protector
  The back protector pocket in this REV’IT! garment is tailor-made to accommodate the SEESOFT CE-level 2 back protector insert Type RV – an easy upgrade to maximize safety.
  
• SEEFLEX CE-level 2 Elbow Protectors
  Certified CE-Level 2 according to the new norm EN1621-1:2012 the SEEFLEX protector is the latest innovation from the in-house R&D department. The new norm also tests the impact levels in various temperature ranges. The SEEFLEX protectors easily surpass the new norm without sacrificing wearer comfort.
  
• SEEFLEX CE-level 2 Shoulder Protectors
  Certified CE-Level 2 according to the new norm EN1621-1:2012 the SEEFLEX protector is the latest innovation from the in-house R&D department. The new norm also tests the impact levels in various temperature ranges. The SEEFLEX protectors easily surpass the new norm without sacrificing wearer comfort.
  
• Soft spacer mesh protector pockets
  In-between, mesh lining to assure positioning of protection components.

Outer shell material

• 3D air mesh
  This knitted fabric has an open, 3-dimensional structure that ensures good ventilation while riding. 3D air mesh is a must-have for long touring riders.
  
• Hypalon
  
• Polyester mesh
  
• Polyester ripstop

Visibility

• Laminated reflection on back
  Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric.
  
• Laminated reflection at chest
  Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric. This welding process also eliminates stitching seams, making the garments safer.
  
• Laminated reflection at upper arms
  Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric. This welding process also eliminates stitching seams, making the garments safer.
  
• Laminated reflective logo on back
  This product has a reflective logo at the back of the garment to help riders who are on the road be seen in low light, inclement weather, and at night.

Wash & Care

Outershell

	Machine wash 30°C, mild cycle
	Do not bleach
	Do not tumble dry
	Do not iron
	Do not dry clean

Removable waterproof liner

	Machine wash 30°C, mild cycle
	Do not bleach
	Do not tumble dry
	Do not iron
	Do not dry clean

Removable thermal liner

	Machine wash 30°C, mild cycle
	Do not bleach
	Do not tumble dry
	Do not iron
	Do not dry clean

Certification

• This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating.