Product Description
Caberg Limited Edition Drift Evo Estremo Carbonio Helmet
$1,099.00 $699.00
EXCLUSIVE ONLINE 9.9 SALE (8TH SEP 7P.M. TO 9TH SEP 10A.M.)
NO EXCHANGE, NO REFUND AND NO WARRANTY
Caberg Drift Evo Limited Edition – ESTREMO CARBONIO (500 pieces Worldwide)
Product Description
The most significant news is the outer shell produced in 2 sizes ( the small one from XS to M; while the bigger one from size L to XXL) that together with a completely redesigned inner lining, offer the perfect balance between comfort and fitting. The rear spoiler enhances the aerodynamics at higher speed, reduces the turbulences and gives a sporty and aggressive look to the helmet.
As far as the inner lining, the cheek pads have been redesigned to offer a closer fitting; it is possible to change and install a different size to get a custom-correct fit.
DRIFT EVO quick release visor mechanism allows visor self-adjustment to guarantee a close contact of visor and window beading. Thanks to the visor mechanism with a spring double movement, it will not be necessary to manually regulate it in order to avoid incoming of water or air. Moreover, the lever on the left side of the visor mechanism consents to stop the position of the visor at 0,5cm from the window beading to avoid or eliminate fogging, which is absorbed by the wind while riding even at higher speed. When the lever is lifted, the visor is locked to avoid sudden opening during a ride or fall.
DRIFT EVO is also equipped with a transparent anti-scratch visor, an adjustable Pinlock lens Max Vision to avoid fogging, and an integrated anti scratch sunshade visor DVT ( Double Visor Tech) easily maneuverable with a lateral lever.
The lower vent on the chin guard drives air directly to the inner side of the visor to avoid misting; the vent on top channels fresh air inside the helmet through numerous air grooves, while the rear vent favors the discharge of hot and stale air.
Both versions are equipped with removable and washable lining including the padding on the chinstrap; double D-ring for the retention system and ready to install most of the communication systems present on the market thanks to the space dedicated to speakers and microphone.
Key Features:
- Shell: Carbon
- Double shell size
- Double visor (Clear + Smoke)
- Visor Quick Release System
- Double Anti-turbolence neck roll
- Antiscratch visor with Pinlock Max Vision
- Tilting Visor
- Double D-ring Buckle
- Internal Air-Circulation
- Removable and washable liner
- Removable wind-stop
- Rain protection rims
- PSB approved
Additional Information
| Weight | 2.72 kg |
|---|---|
| Color | Matt |
| Size | S, M, L, XL, XXL |
Leave a reply
You must be logged in to post a comment.
Product brand
Related Products
The chin guard has two individually adjustable air vents to drive air directly to the inner surface of the visor avoiding misting even during extreme weather conditions. Moreover, helmet ventilation is guaranteed by a wide adjustable frontal vent and inner air grooves. DROID is the result of the gained experience by the first Italian company to produce flip up helmets; It comes with the dual homologation P/J which allows to ride also with the chin guard open thanks to the lever on the left side of the helmet; This lever when in the “J” position, blocks the chin guard in the fully open position avoiding accidental closing. Thanks to the reduced dimensions of the helmet, the weight of the DROID is only 1550 gr +/- 50gr. DROID is equipped with the exclusive Double Visor Tech system that, thanks to the easy to use inner sun-visor, allows to ride always with the right light and in safety. The inner sun-visor is treated anti-scratch, while the outer clear visor is not only anti-scratch but also anti-fog thanks to the Max Vision Pinlock lens. The lining, made with the best hypoallergenic and transpiring fabrics to grant maximum freshness, is entirely removable and washable. Moreover the cheek pads have been conceived to permit the accommodation of glasses.
The chin guard has two individually adjustable air vents to drive air directly to the inner surface of the visor avoiding misting even during extreme weather conditions. Moreover, helmet ventilation is guaranteed by a wide adjustable frontal vent and inner air grooves. DROID is the result of the gained experience by the first Italian company to produce flip up helmets; It comes with the dual homologation P/J which allows to ride also with the chin guard open thanks to the lever on the left side of the helmet; This lever when in the “J” position, blocks the chin guard in the fully open position avoiding accidental closing. Thanks to the reduced dimensions of the helmet, the weight of the DROID is only 1550 gr +/- 50gr. DROID is equipped with the exclusive Double Visor Tech system that, thanks to the easy to use inner sun-visor, allows to ride always with the right light and in safety. The inner sun-visor is treated anti-scratch, while the outer clear visor is not only anti-scratch but also anti-fog thanks to the Max Vision Pinlock lens. The lining, made with the best hypoallergenic and transpiring fabrics to grant maximum freshness, is entirely removable and washable. Moreover the cheek pads have been conceived to permit the accommodation of glasses.
Thanks to a spring tilting system, it is very simple and intuitive to open and close the visor with only one hand. This characteristic differs the Ghost from the other open face helmets on the market equipped with simple goggle, mask, and standard elastic strap bands.
Ghost can be used in 4 different configurations: 1) equipped with the visor, the foam profile along the inner lower side of the visor, and the mask; 2) equipped with the visor and the mask, but without the foam profile of the visor; 3) equipped with the visor and the foam profile but without the mask; 4) equipped only with the visor, without the foam profile and the mask.
The shell is made of tri-composite material (fiber, carbon and kevlar) and is offered in two shell sizes, it is also available the full carbon version with the shell entirely made of carbon fiber.
An easy to mount and remove double Pinlock lens is included to prevent the visor from fogging up.
Thanks to a spring tilting system, it is very simple and intuitive to open and close the visor with only one hand. This characteristic differs the Ghost from the other open face helmets on the market equipped with simple goggle, mask, and standard elastic strap bands.
Ghost can be used in 4 different configurations: 1) equipped with the visor, the foam profile along the inner lower side of the visor, and the mask; 2) equipped with the visor and the mask, but without the foam profile of the visor; 3) equipped with the visor and the foam profile but without the mask; 4) equipped only with the visor, without the foam profile and the mask.
The shell is made of tri-composite material (fiber, carbon and kevlar) and is offered in two shell sizes, it is also available the full carbon version with the shell entirely made of carbon fiber.
An easy to mount and remove double Pinlock lens is included to prevent the visor from fogging up.
Thanks to a spring tilting system, it is very simple and intuitive to open and close the visor with only one hand. This characteristic differs the Ghost from the other open face helmets on the market equipped with simple goggle, mask, and standard elastic strap bands.
Ghost can be used in 4 different configurations: 1) equipped with the visor, the foam profile along the inner lower side of the visor, and the mask; 2) equipped with the visor and the mask, but without the foam profile of the visor; 3) equipped with the visor and the foam profile but without the mask; 4) equipped only with the visor, without the foam profile and the mask.
The shell is made of tri-composite material (fiber, carbon and kevlar) and is offered in two shell sizes, it is also available the full carbon version with the shell entirely made of carbon fiber.
An easy to mount and remove double Pinlock lens is included to prevent the visor from fogging up.
The chin guard has two individually adjustable air vents to drive air directly to the inner surface of the visor avoiding misting even during extreme weather conditions. Moreover, helmet ventilation is guaranteed by a wide adjustable frontal vent and inner air grooves. DROID is the result of the gained experience by the first Italian company to produce flip up helmets; It comes with the dual homologation P/J which allows to ride also with the chin guard open thanks to the lever on the left side of the helmet; This lever when in the “J” position, blocks the chin guard in the fully open position avoiding accidental closing. Thanks to the reduced dimensions of the helmet, the weight of the DROID is only 1550 gr +/- 50gr. DROID is equipped with the exclusive Double Visor Tech system that, thanks to the easy to use inner sun-visor, allows to ride always with the right light and in safety. The inner sun-visor is treated anti-scratch, while the outer clear visor is not only anti-scratch but also anti-fog thanks to the Max Vision Pinlock lens. The lining, made with the best hypoallergenic and transpiring fabrics to grant maximum freshness, is entirely removable and washable. Moreover the cheek pads have been conceived to permit the accommodation of glasses.
Reviews
There are no reviews yet.