Product Description
Caberg Levo Carbon Helmet
$799.00 $699.00
LEVO IS THE FLIP-UP BY CABERG, WITH INNOVATIVE DESIGN AND AVANT-GARDE TECHNICAL SOLUTIONS DEVELOPED FOR THE MOST DEMANDING TOURING RIDERS.
*Kindly note no exchange, no refund and no warranty*
Product Description
The shell is made of composite fibre; the shell of the LEVO CARBON version, instead, is entirely made of carbon.
The two shell sizes offer the best fitting proportion between the shell volume and the motorcyclist’s head size. LEVO obtained the P/J dual homologation after passing the requirements set by the ECE test regulations both for full face (P) and Jet (J) helmets that allows to ride also with the chin guard open. The ventilation system offers optimal comfort even during the most extreme conditions thanks to two air front vents, two rear air extractors, and the built-in channels present in the inner shell.
LEVO is equipped with a panoramic ultra-wide visor that allows the best fields of vision, ensuring an ampli ed visibility in the front part equal to 82°. The helmet is also equipped with Pinlock Max Vision lens to avoid misting and an integrated sunshade visor (DVT Double Visor Tech) easy to manoeuvre with gloves.
The lining, made with the best hypoallergenic and transpiring fabrics to grant maximum freshness, is entirely removable and washable. Moreover, the cheek pads have been conceived to permit the accommodation of glasses.
LEVO is made in Italy.
Key Features:
- Shell: Composite fibre
- Shell: carbon (model Levo Carbon)
- Double shell size
- Double visor (clear + smoke)
- Quick release visor system
- Double anti-turbulence neck roll
- Antiscratch visor with Pinlock Max Vision
- Double D-ring
- Internal air-circulation
- Removable and washable liner
- Rain protection rims
- Wind tunnel aerodynamic testing
- Removable wind-stop
- Wide visor Max Vision
- PSB approved
Additional Information
| Weight | 2.72 kg |
|---|---|
| Color | Carbon |
| Size | S, M, L, XL, XXL |
Leave a reply
You must be logged in to post a comment.
Product brand
Related Products
The chin guard has two individually adjustable air vents to drive air directly to the inner surface of the visor avoiding misting even during extreme weather conditions. Moreover, helmet ventilation is guaranteed by a wide adjustable frontal vent and inner air grooves. DROID is the result of the gained experience by the first Italian company to produce flip up helmets; It comes with the dual homologation P/J which allows to ride also with the chin guard open thanks to the lever on the left side of the helmet; This lever when in the “J” position, blocks the chin guard in the fully open position avoiding accidental closing. Thanks to the reduced dimensions of the helmet, the weight of the DROID is only 1550 gr +/- 50gr. DROID is equipped with the exclusive Double Visor Tech system that, thanks to the easy to use inner sun-visor, allows to ride always with the right light and in safety. The inner sun-visor is treated anti-scratch, while the outer clear visor is not only anti-scratch but also anti-fog thanks to the Max Vision Pinlock lens. The lining, made with the best hypoallergenic and transpiring fabrics to grant maximum freshness, is entirely removable and washable. Moreover the cheek pads have been conceived to permit the accommodation of glasses.
The chin guard has two individually adjustable air vents to drive air directly to the inner surface of the visor avoiding misting even during extreme weather conditions. Moreover, helmet ventilation is guaranteed by a wide adjustable frontal vent and inner air grooves. DROID is the result of the gained experience by the first Italian company to produce flip up helmets; It comes with the dual homologation P/J which allows to ride also with the chin guard open thanks to the lever on the left side of the helmet; This lever when in the “J” position, blocks the chin guard in the fully open position avoiding accidental closing. Thanks to the reduced dimensions of the helmet, the weight of the DROID is only 1550 gr +/- 50gr. DROID is equipped with the exclusive Double Visor Tech system that, thanks to the easy to use inner sun-visor, allows to ride always with the right light and in safety. The inner sun-visor is treated anti-scratch, while the outer clear visor is not only anti-scratch but also anti-fog thanks to the Max Vision Pinlock lens. The lining, made with the best hypoallergenic and transpiring fabrics to grant maximum freshness, is entirely removable and washable. Moreover the cheek pads have been conceived to permit the accommodation of glasses.
Thanks to a spring tilting system, it is very simple and intuitive to open and close the visor with only one hand. This characteristic differs the Ghost from the other open face helmets on the market equipped with simple goggle, mask, and standard elastic strap bands.
Ghost can be used in 4 different configurations: 1) equipped with the visor, the foam profile along the inner lower side of the visor, and the mask; 2) equipped with the visor and the mask, but without the foam profile of the visor; 3) equipped with the visor and the foam profile but without the mask; 4) equipped only with the visor, without the foam profile and the mask.
The shell is made of tri-composite material (fiber, carbon and kevlar) and is offered in two shell sizes, it is also available the full carbon version with the shell entirely made of carbon fiber.
An easy to mount and remove double Pinlock lens is included to prevent the visor from fogging up.
Thanks to a spring tilting system, it is very simple and intuitive to open and close the visor with only one hand. This characteristic differs the Ghost from the other open face helmets on the market equipped with simple goggle, mask, and standard elastic strap bands.
Ghost can be used in 4 different configurations: 1) equipped with the visor, the foam profile along the inner lower side of the visor, and the mask; 2) equipped with the visor and the mask, but without the foam profile of the visor; 3) equipped with the visor and the foam profile but without the mask; 4) equipped only with the visor, without the foam profile and the mask.
The shell is made of tri-composite material (fiber, carbon and kevlar) and is offered in two shell sizes, it is also available the full carbon version with the shell entirely made of carbon fiber.
An easy to mount and remove double Pinlock lens is included to prevent the visor from fogging up.
The chin guard has two individually adjustable air vents to drive air directly to the inner surface of the visor avoiding misting even during extreme weather conditions. Moreover, helmet ventilation is guaranteed by a wide adjustable frontal vent and inner air grooves. DROID is the result of the gained experience by the first Italian company to produce flip up helmets; It comes with the dual homologation P/J which allows to ride also with the chin guard open thanks to the lever on the left side of the helmet; This lever when in the “J” position, blocks the chin guard in the fully open position avoiding accidental closing. Thanks to the reduced dimensions of the helmet, the weight of the DROID is only 1550 gr +/- 50gr. DROID is equipped with the exclusive Double Visor Tech system that, thanks to the easy to use inner sun-visor, allows to ride always with the right light and in safety. The inner sun-visor is treated anti-scratch, while the outer clear visor is not only anti-scratch but also anti-fog thanks to the Max Vision Pinlock lens. The lining, made with the best hypoallergenic and transpiring fabrics to grant maximum freshness, is entirely removable and washable. Moreover the cheek pads have been conceived to permit the accommodation of glasses.
Reviews
There are no reviews yet.